User guide

Data Out
Trigger Out
10 1 . . . .1 1000100 10 11 1000100 . . . .
•
Shift Trigger Position
Clicking the left and right buttons will move the bit trigger position back and
forward by one bit.
Aux Data Out
Aux Data Output - Concepts
The Aux Data Output port on the Pattern Generator's Output ports allows you to
generate a pulse with a frequency that is a fraction of the present clock. Note that
this output is not phasesynchronized with the clock.
Aux Data Out - Procedures
To setup the pattern generator's Aux Data Output port:
• Click Aux Data Setup in the PG Setup menu. A PG Aux Data Output dialog
opens as shown in the figure below.
• Select the mode for the Aux Data Output. You can select from the following
options:
Setting up the Pattern Generator 4
Agilent J-BERT N4903B High-Performance Serial BERT 149