Installation guide

ScriptWorks® Technical Note – Hqn028 – HQMulDev for 4.1 Page 5 Revision 1.4, 96.09.24
Windows NT on Alpha: HQ <name> .AXP, HQ <name> .CTL, <name> .CTL, and
HQ
<tag> _NT.DXP
4. Copy the appropriate driver files into place:
Windows 3.1: Copy into C:\WINDOWS\SYSTEM:
HighWater ISA cards: HWI
<tag> .386 and
HWI
<tag> .DRV
HighWater EISA cards: HWE
<tag> .386
Ultre Corp. cards: UAT <tag> .386 and
UAT
<tag> .DRV
Harlequin PCI cards for Ultre engines: PCI
<tag> .386
Windows 95: Copy into C:\WINDOWS\SYSTEM:
HighWater ISA cards: HWI <tag> .VXD
HighWater EISA cards: HWE <tag> .VXD
Ultre Corp. cards: UAT <tag> .VXD
Harlequin PCI cards for Ultre engines: PCI <tag> .VXD
Windows NT version 3.5 or 3.51: Copy into C:\WINNT\SYSTEM32\DRIVERS.
HighWater ISA cards: HWI <tag> .SYS and
HWI
<tag> .DRV
HighWater EISA cards: HWE
<tag> .SYS
Harlequin PCI cards for Ultre engines: PCI <tag> .SYS
If you are updating an existing installation with new .SYS files you will
need to stop the existing drivers through the Devices control panel before
you can copy the new files into place.
If you have used the ScriptWorks installer these files will already have been copied.
5. Update the system files or registry:
Windows 3.1 and Windows 95:
Edit the SYSTEM.INI file in your Windows directory. You may want to Backup the
current SYSTEM.INI file to SYSTEM.BAK, before making the following alterations.
If you have used the ScriptWorks installer and selected ‘Update System Files’ in the
installer Setup dialog then these additions to SYSTEM.INI will already have been made
for you.
For HighWater ISA and Ultre PC AT cards you will still need to adjust the entries for IRQ
etc. as described below, and activate the drivers. Under Windows 3.1 this can be done
using the supplied Devices control panel applet. Under Windows 95 these adjustments
must be done by manually editing SYSTEM.INI.