Installation guide

ScriptWorks® Technical Note – Hqn028 – HQMulDev for 4.1 Page 4 Revision 1.4, 96.09.24
Windows 3.1 Windows 95
Windows NT on
INTEL platforms
Windows NT on
ALPHA platforms
PLUGIN
SW\DEVICES\
HQ <name> .I32
SW\DEVICES\
HQ <name> .I32
SW\DEVICES\
HQ <name> .I32
SW\DEVICES\
HQ <name> .AXP
CONTROL
Files
SW\DEVICES\
HQ <name> .CTL
SW\DEVICES\
<name> .CTL
SW\DEVICES\
HQ <name> .CTL
SW\DEVICES\
<name> .CTL
SW\DEVICES\
HQ <name> .CTL
SW\DEVICES\
<name> .CTL
SW\DEVICES\
HQ <name> .CTL
SW\DEVICES\
<name> .CTL
DLLs
SW\DEVICES\
HQ <tag> _WIN.D32
SW\DEVICES\
HQ <tag> _W16.D16
SW\DEVICES\
HQ <tag> _W95.D32
SW\DEVICES\
HQ <tag> _NT.D32
SW\DEVICES\
HQ <tag> _NT.DXP
DRIVER for
HighWater
ISA cards
HWI <tag> .386 &
HWI <tag> .DRV
HWI
<tag> .VXD
HWI <tag> .SYS &
HWI <tag> .DRV
HWI <tag> .SYS &
HWI <tag> .DRV
DRIVER for
HighWater
EISA cards
HWE <tag> .386 HWE <tag> .VXD HWE <tag> .SYS HWE <tag> .SYS
DRIVER for
Ultre AT
cards
UAT <tag> .386 &
UUPC.DRV
UAT
<tag> .VXD
UAT
<tag> .SYS
3
UAT <tag> .SYS
3
DRIVER for
Harlequin
PCI cards for
Ultre engines
PCI <tag> .386 PCI <tag> .VXD
PCI
<tag> .SYS
3
PCI <tag> .SYS
3
In the following notes it is assumed that you have installed the RIP into a directory called
C:\MYRIP and that your Windows directory is C:\WINDOWS for Windows 3.1 and 95, or
C:\WINNT for Windows NT. Substitute the appropriate drive and path for your own installation.
1. If you are installing an HQMulDev plugin for a device driven through an EISA card
(currently only the Agfa engines) you should complete the EISA configuration following the
instructions supplied by the card manufacturer before continuing with the rest of this
sequence.
2. If you have been running the un-split version of HQMulDev with ScriptWorks 3.3 you
should stop all system files and remove all entries for them in SYSTEM.INI or the Windows
NT registry before continuing further. For details of those entries please see tech note
Hqn022.
3. Copy the following files into C:\MYRIP\SW\DEVICES
Windows 3.1: HQ
<name> .I32, HQ <name> .CTL, <name> .CTL,
HQ
<tag> _W16.D16 and HQ <tag> _WIN.D32
Windows 95: HQ <name> .I32, HQ <name> .CTL, <name> .CTL, and
HQ
<tag> _W95.D32
Windows NT on Intel: HQ
<name> .I32, HQ <name> .CTL, <name> .CTL, and
HQ
<tag> _NT.D32
3
Added in ScriptWorks version 4.1r0