Certifications 2

Page 2 of 6
4. First aid measures
4.1 Description of the first aid measures
After inhalation: Supply fresh air immediately. If the product irritates the respiratory tract: consult a doctor.
After skin contact: Wash off with plenty of water and soap, rinse thoroughly.
After eye contact: Remove contact lenses. Rinse immediately with plenty of water for at least 15 minutes with
the eyelids open. Consult an ophthalmologist if necessary.
After ingestion: Irritations in the mouth, throat and oesophagus as well as in the gastrointestinal tract are
possible. Immediately rinse mouth thoroughly. Drink plenty of water (200 - 300 ml) in small sips
(dilution effect). Avoid vomiting.
4.2 The most important, urgent and delayed symptoms and effects
There are not known any typical symptoms and effects.
4.3 Information on immediate medical help or special treatment
No special measures required.
5. Fire fighting measures
5.1 Extinguishing agent Not applicable, product is non-flammable
5.2 Special risks of the material/mixture
No special risks caused by the product or mixture.
5.3 Information about fire fighting
The extinguishing agent should be chosen according to the primary cause of fire.
6. Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Note to untrained emergency personnel: Use appropriate protective equipment. Ensure
adequate ventilation and avoid dust. Use of a dust mask is recommended.
6.2 Measures for environmental protection
The product shouldn‘t get into the canalisation, because it floats on the water due to is low
density, and may cause a blockage of pipes.
6.3 Procedure to stop spillage and measures for cleaning
Remove spillage by sweeping, vacuuming or wet absorption. Cover sewer system to prevent
the material from entering the sewer system.
6.4 Reference to another paragraph
Observe protective measures, see paragraphs 7, 8 and 13.
7. Handling and storage
7.1 Notes for safe handling
Avoid the formation of dust. The usage of a particle filtered protective mask FFP2 is required
if the dust concentration rises above the reference value. Avoid contact with eyes. Avoid
ingestion or inhalation.
7.2 Notes for safe storage in consideration of incompatibility
Protect against humidity.
7.3 Specific end-use
Please observe the technical data sheet.
Observe information documents on delivery forms, conveyance, transport options and
storage. For pneumatic conveying, please observe the maximum conveying pressure of 0.8
bar.
Product Safety Information
This voluntary information sheet replaces the Material Safety Data Sheet, since Extron Fireballs
is no hazardous material
according to the CLP regulation.
Trade name: Extron Fireballs
Date: 2021-02-16