User guide

XTP T VGA Transmitter • Installation and Operation 3
Installation and
Operation
This section contains information for connecting and wiring the XTP T VGA. Topics in this
section include:
• Rear Panel Connectors
• Making Connections
• Operation
The XTP T VGA can be mounted in a rack, under a desk, or on a tabletop (see Mounting
on page 28 for more mounting details).
Rear Panel Connectors
POWER
12V
1.0 A MAX
Rx GTx
RS-232
IR
RxTx
AUDIO
LOOP THRU
UNIVERSAL
XTP T VGA
LAN
SIG LINK
XTP OUT
RESET
INPUTS
OVER XTP
ABCDEFG
A
Universal video connector
B
Analog 15-pin HD loop-through connector
C
Analog audio connector
D
RS-232 and IR Over XTP connector
E
XTP output connector
F
LAN connector
G
DC power connector
Figure 2. XTP T VGA Rear Panel Connectors
A
Universal video connector — Connect a video source to the 15-pin HD connector. It
accepts RGBHV, RGsB, RsGsBs, RGBS, RGBcvS, YUVi or YUVp/HDTV, S-video, and
composite video (see Universal Video Wiring on page 5) signals.
B
Analog 15-pin HD loop-through connector — Connect a video display to the
15-pin HD connector for a local monitor display of the universal analog video input.
C
Analog audio connector — Connect an analog stereo audio source to the 3.5 mm
TRS jack.
Tip (+)
Sleeve ( )
Sleeve ( )
Ring ( - )
Tip (+)
Audio Plugs.eps
RCA Connector
3.5 mm Stereo Plug Connector
(balanced)
Sleeve ( )
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 3. Wiring for the Analog Audio Connector