User guide

XTP T VGA Transmitter • XTP System Configuration Software 27
Save output EDID
1. On the EDID Minder screen, right-click on the desired EDID setting in the Connected
Outputs
panel (see figure 27,
3
).
2. Select the Save EDID to PC option. The EDID setting is saved to the connected PC.
Alternatively, right-click on the desired EDID, select Copy, and then Paste the EDID into
the Favorites or Available EDID panel.
Set favorite EDID
Commonly used EDID settings can be added to the Favorites pane for quick access.
1. Click and drag the desired EDID from the Connected Outputs or the Available EDID
panel to the Favorites panel. The EDID setting is copied to the Favorites panel (see
figure 27,
2
). Alternatively, right-click the desired EDID and select Copy. Then Paste
the EDID setting into the Favorites panel.
EDID filters
The filters can be used to easily and quickly locate specific EDID. Selectable filters include:
1
Resolution
3
Video format
2
Refresh rate 4 Audio format
Figure 28. EDID Minder Filters
To use a filter or combination of filters:
1. Select an EDID setting from one of the drop-down lists of the associated filter (see
figure 28,
1
-
4
). The EDID options that match the filter settings are displayed in their
respective panels.
2. Repeat step 1 to apply more filters.
To clear the currently applied filters:
1. Click the Clear button next to the filters (see figure 28,
5
). All filters are reset.
Common timings
This function automatically displays available EDID settings that are common among
multiple selected outputs.
1. Hold <Ctrl> and click the desired outputs in the Connected Outputs panel. The Common
Timings
tab appears, listing the EDID settings common among the selected outputs.
2. Select the desired common EDID setting. The EDID will be shown in the Available EDID
panel.