User guide

XTP T VGA Transmitter • XTP System Configuration Software 17
Using the XTP System Configuration Software
The XTP T VGA can be controlled directly from the front panel config port or remotely from
an XTP matrix switcher.
Connections
When opening the XTP System Configuration Software, the Connections screen opens first.
This screen is used to establish communication with an XTP device via USB (see Config
port on page 10). Ensure the transmitter is connected and powered on before attempting to
connect to it.
Figure 12. Connections Screen
1. From the Connections screen in the software, select the USB radio button (see
figure 12,
1
).
2. Select the connected device to be controlled from the displayed list (see
2
).
3. Click the Connect button (see
3
). The Device Settings screen opens.