User guide

XTP T VGA Transmitter • SIS Configuration and Control 14
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Picture Adjustment Commands
Tint
NOTE: Tint adjustments are for NTSC S-video and NTSC composite video.
Set tint
EX* TINT} TintX*] Set the tint to X*.
Increment value
E+TINT} TintX*]
Increase the tint value.
Decrement value
E-TINT} TintX*]
Decrease the tint value.
View tint
ETINT} TintX*]
Show the tint value.
Contrast
NOTE: Contrast adjustments are for RGBcvS (SCART), interlaced component (YUVi), S-video, and NTSC
composite video.
Set contrast
EX* CONT} ContX*] Set the contrast to X*.
Increment value
E+CONT} ContX*]
Increase the contrast value.
Decrement value
E-CONT} ContX*]
Decrease the contrast value.
View contrast
ECONT} ContX*]
Show the contrast value.
Brightness
NOTE: Brightness adjustments are for RGBcvS (SCART), interlaced component (YUVi), S-video, and NTSC
composite video.
Set brightness
EX* BRIT} BritX*] Set the brightness to X*.
Increment value
E+BRIT} BritX*]
Increase the brightness value.
Decrement value
E-BRIT} BritX*]
Decrease the brightness value.
View brightness
EBRIT} BritX*]
Show the brightness value.
Pixel phase
NOTE: Pixel phase adjustments are for RGBHV and non-interlaced component (YUVp) video.
Set pixel phase
EX* PHAS} PhasX*] Set the pixel phase to X*.
Increment value
E+PHAS} PhasX*]
Increase the pixel phase value.
Decrement value
E-PHAS} PhasX*]
Decrease the pixel phase value.
View pixel phase
EPHAS} PhasX*]
Show the pixel phase value.
NOTE: X* = Picture adjustment 0-255 (128 = default)