User guide

XTP T VGA Transmitter • SIS Configuration and Control 12
Using the Command and Response Table for SIS Commands
The command and response tables begin on page 13. Figure 10 shows the hexadecimal
equivalent of ASCII characters used in the command and response tables.
NOTE: Upper and lowercase text can be used interchangeably unless otherwise stated.
ASCII to Hex Conversion Table
•
Space
Figure 10. ASCII to Hexadecimal Conversion
Symbol Definitions
]
= Carriage return and line feed
| or }
= Carriage return with no line feed
•
= Space
W or
E
= Escape key