User guide

Updating Firmware with Firmware Loader
To upload and update firmware for the XTP T USW 103, download the new firmware to a
connected computer and upload the firmware with the Firmware Loader utility.
Downloading Extron Firmware Loader
Figure 19. Locating Firmware Loader Software on the Extron Website
1. On the Extron website, www.extron.com, click the Download tab.
2. On the left sidebar, click the Software link.
3. Navigate to Firmware Loader.
4. Click the Download link on the right that corresponds with the program.
5. Submit any required information to start the download. Note where the file is saved.
Installing Firmware Loader
1. Once Firmware Loader has been downloaded, run the .exe file from the save location.
The installation wizard window opens.
2. Follow the instructions on the Installation Wizard screens to install the new firmware on
the computer. A Release Notes file, giving information on what has changed in the new
firmware version, and a set of instructions for updating the firmware are also loaded.
XTP T USW 103 • Reference Information 28