User guide

To download the software from the website:
Figure 12. Extron Website Download Page
1. On the Extron website, click the Download tab.
2. From the left sidebar, click the Software link.
3. Navigate to XTP System Configuration.
4. Click the Download link to the right of the desired device.
5. Submit any required information to start the download. Note where the file is saved.
6. Open the executable (.exe) file from the save location.
7. Follow the instructions that appear on the screen. By default, the installation creates a
directory in the Program Files folder, and places four icons into a group folder named
“Extron Electronics\XTP System Configuration.”
Using the XTP System Configuration Software
The XTP T USW 103 can be controlled directly from the front panel config port or remotely
from an XTP matrix switcher.
Connections
When opening the XTP System Configuration Software, the Connections screen opens first.
This screen is used to establish communication with an XTP device USB
(see Config port on page 10).
1. From the Connections screen, select the USB radio button.
2. Select the connected device to be controlled from the displayed list.
3. Click the Connect button.
XTP T USW 103 • XTP System Configuration Software 19