User guide

Reset Modes
Use the recessed Reset button on the rear panel of the switcher to return the device
to default settings or to restore factory-shipped firmware.
Reset Mode Summary
Mode Activation Result Purpose/Notes
Factory Reset
(Mode 1)
Hold the recessed Reset button
down while applying power to the
device.
NOTE: After a mode 1 reset,
update the device with the
latest firmware version. DO NOT
operate the firmware version
that results from this mode
reset.
The device reverts to the factory
default firmware.
NOTE: If you do not want to
update the firmware or perform
a mode 1 reset by mistake,
cycle power to the device to
return the firmware version
running prior to the reset.
Use mode 1 to roll back
to factory firmware for a
single power cycle if an
incompatibility issue arises.
RESET
XTP T USW 103 • Operation 12