User guide

Installation
This section contains information for connecting and wiring the XTP T USW 103. Topics in
this section include:
• Rear Panel Connectors
• Making Connections
The XTP T USW 103 can be mounted in a rack, under a desk, or on a tabletop (see
Mounting on page 32 for more mounting details).
Rear Panel Connectors
POWER
12V
2
1.0 A MAX
G
1
SIG LINK
XTP OUT
LAN
AUDIO
RGB HDMI HDMI
CONTACT
Rx GGTx
RS-232 IR
RxTx
RS-232
Tx Tx
3
123
R
OVER XTP REMOTE
INPUTS
ACBDEFGHI
A
Audio connector
B
Analog video connector (input 1)
C
HDMI connectors (inputs 2 and 3)
D
XTP output connector
E
LAN connector
F
RS-232 and IR Over XTP connector
G
Contact closure connector
H
Remote RS-232 connector
I
DC power connector
Figure 2. XTP T USW 103 Rear Panel Connectors
A
Audio connector — Connect an analog audio source to the 3.5 mm TRS jack. All
three video inputs can share this audio input.
Tip (+)
Sleeve ( )
Sleeve ( )
Ring ( - )
Tip (+)
Audio Plugs.eps
RCA Connector
3.5 mm Stereo Plug Connector
(balanced)
Sleeve ( )
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 3. Wiring for TRS Audio
3XTP T USW 103 Switcher • Installation