User guide

Installing Firmware Loader
1. Once Firmware Loader has been downloaded, run the .exe file from the save location.
The installation wizard window opens.
2. Follow the instructions on the Installation Wizard screens to install Firmware Loader on
the computer.
Downloading Firmware
Figure 30. Downloading Firmware from the Extron Website
1. On the Extron website, click the Download tab (see figure 30,
1
).
2. On the left sidebar, click the Firmware link (see
2
).
3. Navigate to the XTP T USW 103.
4. Ensure the available firmware version is a later version than the current one on the
device (see Device Information panel on page 29).
NOTE: The firmware release notes are a PDF file that provides details about the
changes between different firmware versions. The file can be downloaded from the
same page as the firmware.
5. Click the Download link to the right of the desired device.
6. If required, enter any required information to start the download. Note where the file is
saved.
XTP T USW 103 Switcher • Reference Information 34