User guide

XTP T FB 202 Floor Box Transmitter • Introduction 1
Introduction
This section contains general information about this guide and the Extron XTP T FB 202
Universal Floor Box Twisted Pair Transmitter, and selected device features. Topics in this
section include:
• About this Guide
• About the XTP T FB 202
• Key Features
About this Guide
This guide contains installation, and control procedures, and reference information for the
XTP T FB 202 Universal Floor Box Twisted Pair Transmitter. In this guide, the terms
“XTP T FB 202” and “transmitter” are used interchangeably to refer to the XTP T FB 202
Universal Floor Box Twisted Pair Transmitter.
About the XTP T FB 202
The Extron XTP T FB 202 is a two-input XTP transmitter that sends HDMI or digitized analog
video, audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet (100 m) over a single
shielded twisted pair (STP) cable. It is HDCP compliant, and supports 1080p/60 Deep Color
and 1920x1200 signals. The XTP T FB 202 works with XTP Systems for signal distribution
and long-distance transmission between remote endpoints. It is made specifically to fit into
floor boxes from OBO Bettermann, MK by Honeywell, Electraplan, and PUK.
The XTP T FB 202 can be powered locally or remotely through an Extron Power Injector or
XTP matrix switcher (see Power Connection on page 15).
The XTP T FB 202 can be configured and controlled with Extron Simple Instruction Set (SIS)
commands (see SIS Configuration and Control on page 18) or the XTP System
Configuration Software (see XTP System Configuration Software on page 23).