User guide
XTP T FB 202 Floor Box Transmitter • XTP System Configuration Software 24
Using the XTP System Configuration Software
The XTP T FB 202 can be controlled directly from the front panel config port or remotely
from an XTP matrix switcher.
Connections
When opening the XTP System Configuration Software, the Connections screen opens first.
This screen is used to establish communication with an XTP device via USB (see Config
port on page 10).
Figure 23. Connections Screen
1. From the Connections screen, select the USB radio button (see figure 23,
1
).
2. Select the connected device to be controlled from the displayed list (see
2
).
3. Click the Connect button (see
3
). The Device Settings screen opens.