User guide

XTP T FB 202 Floor Box Transmitter • SIS Configuration and Control 21
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Black signal for audio only
NOTE: The switcher uses a black signal to simulate a 720p or 1080p, 50 Hz or 60 Hz signal so audio can
be passed without video.
Enable black signal
EB1AFMT} AfmtBX$]
Enable a black signal for audio only.
Disable black signal
EB0AFMT} AfmtBX$]
Disable the black signal.
View black signal setting
EBAFMT} AfmtBX$]
View the black signal setting.
Picture Adjustment Commands (Analog Only)
Pixel phase
Set a pixel phase value
EX1@ PHAS} PhasX1@] Adjust the pixel phase to X1@.
Increment value
E+PHAS} PhasX1@]
Increase the pixel phase.
Decrement value
E-PHAS} PhasX1@]
Decrease the pixel phase
View pixel phase value
EPHAS} PhasX1@]
Show the pixel phase value
Horizontal shift
Set horizontal shift value
EX1# HCTR} HctrX1#]
Set horizontal location of first active
pixel in active window.
Increment value
E+HCTR} HctrX1#]
Increase the shift value (move the
image to the right).
Decrement value
E-HCTR} HctrX1#]
Decrease the shift value (move the
image to the left).
View horizontal shift value
EHCTR} HctrX1#]
Show the horizontal location of the first
active pixel in the active window.
Vertical shift
Set vertical shift value
EX1# VCTR} VctrX1#]
Set vertical location of first active pixel
in active window.
Increment value
E+VCTR} VctrX1#]
Increase the shift value (move the
image down).
Decrement value
E-VCTR} VctrX1#]
Decrease the shift value (move the
image up).
View vertical shift value
EVCTR} VctrX1#]
Show vertical location of the first active
pixel in active window.
Image reset
Execute an image reset
1A
Aadj1
]
Set picture adjustment settings to the
default values.
Presets Commands
Input presets
Save an input preset
X1$, SprX1$] Save a configuration to preset X1$.
Recall an input preset
X1$. RprX1$] Recall a configuration from preset X1$.
NOTE: X$ = Enable or disable 0 = off or disable
1 = on or enable (default)
X1@ = Pixel phase 0-255 (128 = default)
X1# = Horizontal or vertical shift 0-65,535 (32,768 = default)
X1$ = Preset number 1-8