Specifications
N E W P R O D U C T S
36
www.extron.com
© 2014 Extron Electronics. All rights reserved.
Prices and specifications subject to change without notice.
USA West
+1.714.491.15 00 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.85 0.1000 / +800.633.9876
+1.919.85 0.1001 FAX
AUDIO PRODUCTS
XPA 1002-70V and XPA 1002-100V
Two Channel High Impedance Amplifiers – 100 Watts Per Channel
The Extron XTRA
™
Series XPA 1002-70V and
XPA 1002-100V are half rack 1U, convection cooled
power amplifiers delivering two channels of 100 watts
per channel for 70 volt or 100 volt high impedance
speaker systems in voice reinforcement and distributed
audio applications. These professional grade amplifiers
feature a 100 dB signal-to-noise ratio with 0.1%
THD+N. The XPA 1002-70V and XPA 1002-100V are
ENERGY STAR
®
qualified amplifiers with an Extron
exclusive, highly efficient, advanced Class D amplifier
design. They also feature patented CDRS
™
- Class D
Ripple Suppression technology that provides a smooth,
clean audio waveform and an improvement in signal
fidelity over conventional Class D amplifiers. The
XPA 1002-70V and XPA 1002-100V are housed in a half
rack width metal enclosure, conserving rack space and
weighing only 2.5 lbs (1.1 kg). The Extron exclusive,
high efficiency design generates very little heat and
allows the amplifier to be convection cooled.
FEATURES
• 200 watts rms output power:
XPA 1002-70V - 2 x 100 watts @ 70 volts
XPA 1002-100V - 2 x 100 watts @ 100 volts
• ENERGY STAR
®
qualified amplifier
• Professional grade signal-to-noise and
THD+N performance
• Extron Patented CDRS
™
- Class D Ripple
Suppression
• Convection cooled, fanless operation
• Ultra low inrush current - no need for power
sequencing
• Power factor correction - removes harmonic content
on AC line
• Rack-mountable 1U, half rack width enclosure
• UL 2043 plenum rated when used with optional
Flexible Conduit Adapter Kit
XPA 1002 Plus
Two Channel Low Impedance Amplifier – 100 Watts Per Channel
The Extron XTRA
™
Series XPA 1002 Plus is a half
rack 1U, convection cooled power amplifier delivering
two channels of 100 watts into 4 or 8 ohms. This
professional grade amplifier features a 105 dB signal-
to-noise ratio with 0.05% THD+N. The XPA 1002 Plus
is an ENERGY STAR
®
qualified amplifier with an Extron
exclusive, highly efficient, advanced Class D amplifier
design. It also features patented CDRS
™
- Class D
Ripple Suppression technology that provides a smooth,
clean audio waveform and an improvement in signal
fidelity over conventional Class D amplifiers. The
XPA 1002 Plus is housed in a half rack width metal
enclosure, conserving rack space and weighing only
2.5 lbs (1.1 kg). The Extron exclusive, high efficiency
design generates very little heat and allows the
amplifier to be convection cooled.
FEATURES
• 200 watts rms output power:
2 x 100 watts @ 4 or 8 ohms,
or 1 x 200 watts @ 8 ohms (bridged)
• ENERGY STAR
®
qualified amplifier
• Professional grade signal-to-noise and
THD+N performance
• Extron Patented CDRS
™
- Class D Ripple
Suppression
• Convection cooled, fanless operation
• Ultra low inrush current - no need for power
sequencing
• Power factor correction - removes harmonic
content on AC line
• Rack-mountable 1U, half rack width enclosure
• UL 2043 plenum rated when used with optional
Flexible Conduit Adapter Kit
Model Version Description Part Number
XPA 1002-70V 100 Watts Per Ch @ 70 V .................... 60-1302-01
XPA 1002-100V 100 Watts Per Ch @ 100 V ................... 60-1302-11
Model Version Description Part Number
XPA 1002 Plus 100 Watts Per Ch @ 8 Ohms ................. 60-849-21
Learn more about cost saving
XTRA
™
technologies
www.extron.com/xtrapaper
Learn more about cost saving
XTRA
™
technologies
www.extron.com/xtrapaper