Specifications
N E W P R O D U C T S
35
China
+86.21.3760.1568 / +4000.398766
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Middle East
+971.4.299.1800
+971.4.299.1880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
For updated product availability, go to www.extron.com
Model Version Description Part Number
AXP 50 C AT 5 In Expansion Processor ............................ 60-1325-01
Model Version Description Part Number
AXP 64 C AT 6 In, 4 Out Expansion Processor ..................... 60-1499-01
AUDIO PRODUCTS
AXP 50 C AT
Five Input Audio Expansion Processor with AEC and Dante
The Extron AXP50CAT is a five input audio expansion
processor with Extron ProDSP
™
for integrating remote
microphones and other sources onto a Dante
™
-enabled
Extron DMP128 audio system. A single Ethernet cable
from one AXP50CAT, or several linked units, to a
central equipment rack significantly reduces the effort
and expense of pulling one cable for each mic. The
AXP50CAT provides 48volt phantom power and a
digital control portfor all mic/line inputs. Dedicated
signal processing is available for each input, including
gain, filtering, dynamics, and AEC - acoustic echo
cancellation. The intuitive DSPConfigurator
™
Software
makes it quick and easy to set up DSP parameters and
AEC on the AXP50CAT.
FEATURES
• Five mic/line level inputs with 48volt
phantom power
• Independent AEC- acoustic echo cancellation on
each channel
• Dante audio networking provides a wide range of
expansion capabilities
• Built-in four-port Gigabit switch
• One digital input and dual digital outputs at each
mic/line input for control
• Compact 1U, half rack width metal enclosure
• ProDSP
™
32/64-bit floating point signal processing
• Studio grade 24-bit/48kHz analog-to-digital
converters
• Low latency DSP processing
• DSP Configurator
™
Software
• Intuitive Graphical User Environment
• Flexible pre- and post-processing input signal
routing
• Flexible control options
• Building Blocks processor settings
AXP 64 C AT
6 Input, 4 Output Audio Expansion Processor with AEC and Dante
The Extron AXP64CAT is an audio expansion
processor with six mic/line inputs and four line
outputs for remote connectivity to a Dante
™
-enabled
DMP 128 audio system. It can be used to place six
mic/line sources onto a Dante audio network, and
alsoroute any four Dante channels to an amplifier or
other destination. The AXP64CATfeatures Extron
ProDSP
™
with gain, filtering, and dynamics processing
for all inputs and outputs. Four of the inputs also
include AEC, 48volt phantom power, and control ports.
FlexInputs offer the additional capability to process a
Dante channel in place of a local input. The outputs can
process any available Dante channels. A single Ethernet
cable from one AXP64CAT, or several linked units, to
a central equipment rack greatly reduces the effort and
expense of pulling one cable for each endpoint.
FEATURES
• Six mic/line level inputs, four with 48 volt
phantom power
• Four independent channels of AEC- acoustic
echo cancellation
• Four inputs with FlexInput capability to select
between analog or Dante inputs
• Four Dante to line level outputs
• Dante audio networking provides a wide range of
expansion capabilities
• Built-in four-port Gigabit switch
• One digital input and dual digital outputs at first four
mic/line inputs for control
• Compact 1U, half rack width metal enclosure
• ProDSP
™
32/64-bit floating point signal processing
• Studio grade 24-bit/48kHz analog-to-digital and
digital-to-analog converters
• Low latency DSP processing
• DSP Configurator
™
Software
• Intuitive Graphical User Environment
• Flexible pre- and post-processing input signal
routing
• Flexible control options
• Building Blocks processor settings