Specifications

N E W P R O D U C T S
28
www.extron.com
© 2015 Extron Electronics. All rights reserved.
Prices and specifications subject to change without notice.
USA West
+1.714.491.15 00 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.85 0.1000 / +800.633.9876
+1.919.85 0.1001 FAX
Model Version Description Part Number
AXP 64 C AT 6 In, 4 Out Expansion Processor ..................... 60-1499-01
AXP 64 C AT
6 Input, 4 Output Audio Expansion Processor with AEC and Dante
The Extron AXP64CAT is an audio expansion
processor with six mic/line inputs and four line outputs
for remote connectivity to a Dante
™
-enabled DMP 128
audio system. Itis used to place six mic/line sources
onto a Dante audio network, and route any four Dante
channels from the network to an amplifier or other
destination. The AXP64CATfeatures Extron ProDSP
™
with gain, filtering, and dynamics processing for all
inputs and outputs. Four of the inputs also include AEC,
48volt phantom power, and dedicated control ports for
mic control. FlexInputs offer the additional capability to
process Dante channels in place of the first four local
inputs. A single Ethernet cable from one AXP64CAT,
or several linked units, to a central equipment rack
greatly reduces the effort and expense of pulling one
cable for each endpoint.
FEATURES
• Six mic/line level inputs, four with 48 volt
phantom power
• Four independent channels of AEC- acoustic
echo cancellation
• Four inputs with FlexInput capability to select
between analog or Dante inputs
• Four Dante to line level outputs
• Dante audio networking provides a wide range of
expansion capabilities
• Built-in four-port Gigabit switch
• One digital input and dual digital outputs at first four
mic/line inputs for control
• Compact 1U, half rack width metal enclosure
• ProDSP
™
32/64-bit floating point signal processing
• Studio grade 24-bit/48kHz analog-to-digital and
digital-to-analog converters
• Low latency DSP processing
• DSP Configurator
™
Software
• Intuitive Graphical User Environment
• Flexible pre- and post-processing input
signal routing
• Flexible control options
• Building Blocks processor settings
AXI 22 AT D
2 Input, 2 Output Audio Expansion Interface with Dante –
Decora
®
Wallplate
The Extron AXI 22 AT D is a single-gang Decora
®
-style
audio interface for integrating two mic/line sources
onto a Dante
™
-enabled DMP 128 audio system.
It features two XLR audio inputs and switchable
48 volt phantom power for connecting and powering
condenser microphones, plus gain controls for each
input. The AXI 22 AT D also features two line outputs
behind the wallplate for routing any two Dante channels
from the network to an amplifier, or connecting into
an optional secondary wallplate with two XLR outputs.
The AXI 22 AT D interfaces with Extron Dante-equipped
audio processors over a standard local area network,
and can be powered through PoE. This greatly
simplifies the cabling infrastructure for integrating
audio connectivity in locations remote from a central
equipment rack.
FEATURES
• Two mic/line level inputs with switchable 48 volt
phantom power
• Two Dante
™
to line level outputs
• Dante audio networking provides a wide range of
expansion capabilities
• Studio grade 24-bit/48 kHz analog-to-digital and
digital-to-analog converters
• Back panel recessed, detented gain controls
• XLR audio inputs for direct microphone connection
• Optional secondary wallplate with two XLR outputs,
part #70-1103-02 and 70-1103-03
• Power over Ethernet allows the AXI 22 AT D
to receive power over a single Ethernet cable,
eliminating the need for a local power supply
• Mounts in an included Decora-style wallplate
• Highly reliable, energy-efficient external
universal power supply included, replacement
part #70-775-01
Model Version Description Part Number
AXI 22 AT D 2 In, 2 Out Expansion Interface - Decora - Black ..... 60-1517-02
AXI 22 AT D 2 In, 2 Out Expansion Interface - Decora - White ..... 60-1517-03
DANTE AUDIO PRODUCTS