User guide
References
Specifications
Included Parts
Optional Accessories
Mounting the XPA 1002 and XPA 2001
Specifications
XPA 1002, XPA 2001 (XTRA) Series
Audio
Voltage gain
XPA 1002 ................................ 16x (24 dB)
XPA 2001-70V ......................... 57x (35 dB)
XPA 2001-100V ....................... 81x (38 dB)
Stereo channel separation .............. >75 dB @ 1 kHz
CMRR ............................................ 75 dB @ 1 kHz (typical)
Audio input
Number/signal type ........................ 1 stereo or 2 mono, balanced/unbalanced
Connectors .................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance ..................................... >10k ohms unbalanced/balanced, DC coupled
Nominal level ................................. +4 dBu (1.23 Vrms), balanced
Maximum level ............................... +20 dBu (7.75 Vrms), balanced
Input sensitivity
XPA 1002 ................................ +4 dBu (1.23 Vrms)
XPA 2001-70V, XPA 2001-100V +4 dBu (1.23 Vrms) if driven by one input
-2 dBu (0.615 Vrms) if both inputs are summed
Input signal detection threshold ..... -30 dBu ±3 dB, balanced
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type
XPA 1002 ................................ 1 stereo, 4- or 8-ohm direct
XPA 2001-70V ......................... 1 mono, 70 V line
XPA 2001-100V ....................... 1 mono, 100 V line
Connectors
XPA 1002 ................................ (1) 5 mm screw lock captive screw connector, 4 pole
XPA 2001-70V, XPA 2001-100V (1) 5 mm screw lock captive screw connector, 2 pole
NOTE: These connectors accept wires of 22 AWG to 12 AWG.
XTRA Series Power Ampliers • References 13