User guide

VoiceLift System with PVS 405D • Special Application: Instant Alert 33
7. Test the instant alert notification as follows:
a. Ensure that the MLC 104 IP Plus is connected to the network and powered on.
b. Pendant microphone: Ensure that channel A or B has been selected for the
microphone.
c. Handheld microphone: Remove the battery cover.
d. Press and hold both sections of the Volume button on the pendant microphone or
both Volume buttons on the handheld microphone simultaneously for 3 seconds.
The LED in the receiver dome blinks, alternating amber and green.
Press and hold both
sections of the
V
olume button
simultaneously
.
A
B
VOLUME
VLH 102
Press and hold both
Volume buttons
simultaneously.
VLP 202
Figure 30. Testing the Instant Alert
e. Check for the arrival of the e-mail notification.
8. If necessary, make adjustments to the relay and digital input wiring, the monitor
settings, or the e-mail notification settings.
9. Replace the receiver dome in its housing (see page 23) and replace the battery cover
on the handheld microphone, if applicable.