User guide

VoiceLift System with PVS 405D • Features and Operation 18
When this button is pressed, the receiver produces a tone and the Pwr LED blinks.
NOTES:
• You can disable the tone by setting the Tone DIP switch on the receiver to Off (see
c
DIP switches on page 21).
• Volume adjustment works only for microphones set to channel A or B (see
figure 17).
Channel Switch
Figure 17. Channel Switch on the VLP 202 Pendant Microphone
Handheld microphone volume adjustment
To adjust the volume on the VLH 102 Handheld Microphone:
1. Remove the battery cover (see Installing or Replacing the Microphone Battery
on page 13 for the procedure).
2. Press the Up (
>
) or Down (
<
) button, located below the battery compartment, to
raise or lower the volume.
A
B
VOLUME
A
B
VOLUME
Figure 18. Volume Buttons on the Handheld Microphone
3. Replace the battery cover (see Installing or Replacing the Microphone Battery
for the procedure).