User guide

VoiceLift System with PVS 405D • Features and Operation 14
2. Place the battery in the compartment, aligning the + and poles as indicated inside
the compartment (the positive terminal is at the bottom).
3. Replace the battery cover.
Pendant microphone:
a. Place the cover onto the microphone so that the battery is covered.
b. Slide the cover upward until the two tabs at the top of the cover
snap into the slots on the microphone.
Handheld microphone:
a. Align the tabs on both sides of the cover with the two slots on
the outer edges near the bottom of the microphone (see the
illustration at right).
b. Press the cover until the tabs snap into the slots.
c. Slide the cover upward into place (you may need to press firmly).
Charging the Microphone Battery
The microphones can be charged by the following methods:
In the VLC 202 charging station
Using the provided wall charger (VLH 102 only)
Using the charging station
The VLC 202 charging station provides a convenient way to charge the microphone
battery overnight or between uses. The charging station can charge two microphones
simultaneously, and the microphones can start and finish charging at different times.
The microphone battery requires up to 5 hours to charge fully in order to provide a full
day of use. It is safe to charge for extended periods, such as winter or spring breaks.
However, it is recommended that you store the microphone out of the charger.
CAUTION: Risk of explosion. Do not replace the battery with an incorrect type.
Use only NiMh or alkaline batteries.
ATTENTION:
Do not recharge alkaline batteries.
Dispose of used batteries according to the instructions provided on the battery
packaging.
A
B
VOLUME
Slots