User guide

VoiceLift System with PVS 405D • Features and Operation 10

Back panel

Figure 7. VLP 202 Pendant Microphone Back Panel

a Clip — Use this clip to attach the VLP 202 to clothing or to a lanyard (included). See

Setting Up and Using the Microphones on page 16 to attach the lanyard.

The provided lanyard features:

• A lanyard lock to retain adjustments to the position of the microphone clipped to

the lanyard.

• A breakaway clasp that separates and releases the lanyard from around the neck

if it is pulled tight. Place this clasp at the back of your neck when wearing the

pendant microphone.

b Channel selection switch — Use a small screwdriver to turn this rotary switch to

select channel A, B, C, or D when setting up the microphone.

Primary channels A (2.3 MHz) and B (2.8 MHz) are for use by the

instructor or speaker. Secondary channels C (2.3 MHz) and

D (2.8 MHz) are for student use. The secondary channels operate

the same as channels A and B, but the microphone Volume button is

disabled.

NOTE: When two microphones are used, they must be on different frequencies.

Only channels A and B, A and D, B and C, or C and D can be used together.

c Microphone label recess — Place the appropriate provided sticker in this space to

identify the microphone or the user for whom the microphone has been set up (see

Setting Up and Using the Microphones).