Installation guide

VoiceLift Microphone Installation • Introduction — Planning
1-4
Introduction — Planning, cont’d
• Optional VLR 102SR Secondary receiver. One or more secondary receivers (VLR 102 SR) may be needed if any
of the following conditions exist:
 The room is larger than 40' by 40'.
 Obstructions exist between the microphone and the receiver.
 The room is odd-shaped, e.g., L-shaped or long.
 The room has recessed or sheltered areas, such as alcoves or bays.
 The room has large windows or windows on multiple walls.
 Portions of the walls are dark and/or covered. Dark surfaces reduce signal reflection. Take the following into
consideration:
– Wall art
– Curtains/blinds
– Acoustical panels
– Wall material/texture
The following diagrams show examples of secondary receiver placement.
Receiver and one secondary receiver in an
odd-shaped room
Receiver and one secondary receiver
in a long room
Receiver and three secondary receivers in a large room, or a room with
dark walls, obstructions, and/or windows