Installation guide

3. Attach the receiver dome to the
housing (continued).
c. Place the dome onto the housing, aligning the arrow on
the dome’s locking tab with the arrow in the housing
rim. The two tabs in the housing should slide into the
two slots in the base.
d. Twist the dome to the right (clockwise) until it locks in
place (approximately 1/8 turn). The dot on the rim of
the housing should now align with the arrow on the
dome’s locking tab.
ñ
Align the arrows on the housing rim and
the dome tab.
õ
The arrow on the dome tab aligns
with the dot on the housing rim when
the dome is locked into place.
Arrow
Receiver
Dome
Twist to
Lock
Align Arrows
Arrow
Dot
Ta b
Ta b
Arrow on Housing
Arrow on Ta b
Dot on Housing
Arrow on Tab
VoiceLift Microphone Installation • Installation — Stage 2
2-12
Installation — Stage 2, cont’d