User Guide Owner's manual

Section 5: Technical Data VN-QUANTUM User Guide
Page 98 I455GB issue 8
ES3310 Output Card
Function: Final composited video output to the target display. Sources can be
derived from Video (via ES3311-2 Input Card), RGB and DVI
Graphics, VN-GLIMPSE and Image Files. Provides up-scaling
(magnification) of sources. Two output channels are provided per
card.
Card Weight: 0.29 kg (0.63 lb).
Connector Type: DVI-I (female).
Pin-out Details:
Digital Connections
Pin Function Pin Function Pin Function
1 TMDS 2- 9 TMDS 1- 17 TMDS 0-
2 TMDS 2+ 10 TMDS 1+ 18 TMDS 0+
3 Ground (2/4) 11 Ground (1/3) 19 Ground (0/5)
4
No connection
12
No connection
20
No connection
5
No connection
13
No connection
21
No connection
6 DDC Clock 14 +5V supply* 22 Ground (Clk)
7 DDC Data 15 Ground (for 5v) 23 TMDS Clock+
8
Analog V-Sync
16 Hot Plug Detect 24 TMDS Clock-
* 5V on pin 14 limited to 200mA by thermal fuse.
Analog Connections
Pin Function
C1 Red Signal
C2 Green Signal
C3 Blue Signal
C4 Horizontal Sync
C5 Ground
Mating Connector: DVI-D, DVI-A or DVI-I (male).
Recommended Cable: Digital: DVI Single or Dual Link Digital Video Cable;
Analog: DVI Analog Video Cable.
Max. Cable Length: Digital: 5 metres (16 feet).
Analog: 10 metres (32 feet)
Signal Type: DVI-1.0 or Analog RGB.
RGB Levels:
Video: 0.7V ±1% into 75Ω; Sync: 2.4V into 2K2.
RGB Sync: RBGHV (H & V TTL sync).
Pixel Clock: 25MHz – 165MHz.
Output Resolution: SVGA (600 x 800 pixels) to 1920x1080 resolution.
Color Depth: 24-bit maximum.
Scan Rate: 50 or 60 Hz.
Scan Mode: Progressive.
DDC: Not supported.
Scaling Engine: 370Mpixels/s real-time using ES patented convolver.
Scaling Factor:
Variable from unity down to 1/16 of native resolution horizontally
and vertically.
NOTE:
Analog Vertical Sync
is on pin 8.