User Guide Owner's manual

ManualsBrandsExtron Electronics ManualsAccessories for videoVN-QUANTUM

100

VN-QUANTUM User Guide Section 5: Technical Data

I455GB issue 8 Page 95

Control Inputs/Outputs

The following control input/output connectors appear on the ES3301-2 and ES3302 / 3304 Card

Frames.

CONTROL Port

Function:

Connection to a VN-COMMANDER control PC.

Connector Type:

Shielded RJ-45 Socket.

Pin-out Details:

Pin Function Pin Function

1 TX_D1+ (TX+ ) 5 BI_D3–

2 TX_D1– (TX– ) 6 RX_D2– (RX– )

3 RX_D2+ (RX+) 7 BI_D4+

4 BI_D3+ 8 BI_D4–

Mating Connector:

Shielded RJ-45 Plug.

Recommended Cable:

Shielded twisted pair (STP).

Max. Cable Length:

100 metres (330 feet).

Comms Standard:

10/100BASE-T (Fast Ethernet)

Default IP Address:

Factory-set to 172.28.232.11. No DHCP option.

User-definable via control software.

MEDIA I & II Ports (Not supported on the ES3304 VN-QUNATUM CONNECT)

Function:

Connection to a local or wide area network for access to network

content or VN-GLIMPSE sources.

Connector Type:

Shielded RJ-45 Socket.

Pin-out Details:

Pin Function Pin Function

1 BI_DA+ 5 BI_DC-

2 BI_DA- 6 BI_DB-

3 BI_DB+ 7 BI_DD+

4 BI_DC+ 8 BI_DD-