User Guide User guide
Table Of Contents
- What is VN-MATRIX?
- Functional Overview
- Example System Application
- Front Panel Features
- Rear Panel Features
- Accessories
- Choosing a Suitable Location
- Mains Power Connection (via PSU)
- Mains Power Cord (for PSU)
- Setup and Connection Procedure
- The VN-MATRIX Web Interface
- Configuring a VN-MATRIX as an Encoder (source)
- Configuring a VN-MATRIX as a Decoder (display)
- Troubleshooting
- Encoder Set Up
- Decoder Set Up
- System Set Up
- Overview
- Setting-up a Serial Data Stream
- Setting-up a Serial Passthrough Group
- Setting-up a Remote Control Group
- Serial / Telnet Commands
- Overview
- VN-MATRIX Hardware
- Serial Interface – Quick Reference
- Telnet Interface – Quick Reference
- Web Interface – Quick Reference
- Network Characteristics
Section 5: Serial Transport & Control Methods VN-MATRIX User Guide
Page 90 I458GB issue 6
Setting-up a Serial Data Stream
Login to the Web Interface (see page 41).
From the Device List page click on the required encoder device.
From the Device page click the Serial tab to display the following:
Using the mode listbox select the server option.
Change the other settings (e.g. baud rate) as required, then click the Save tab.
Return to the Device List and do the same for the decoder device.
IMPORTANT: No data will be transported until the decoder ‘connects’ to the encoder stream.