User Guide User guide
Table Of Contents
- What is VN-MATRIX?
- Functional Overview
- Example System Application
- Front Panel Features
- Rear Panel Features
- Accessories
- Choosing a Suitable Location
- Mains Power Connection (via PSU)
- Mains Power Cord (for PSU)
- Setup and Connection Procedure
- The VN-MATRIX Web Interface
- Configuring a VN-MATRIX as an Encoder (source)
- Configuring a VN-MATRIX as a Decoder (display)
- Troubleshooting
- Encoder Set Up
- Decoder Set Up
- System Set Up
- Overview
- Setting-up a Serial Data Stream
- Setting-up a Serial Passthrough Group
- Setting-up a Remote Control Group
- Serial / Telnet Commands
- Overview
- VN-MATRIX Hardware
- Serial Interface – Quick Reference
- Telnet Interface – Quick Reference
- Web Interface – Quick Reference
- Network Characteristics
VN-MATRIX User Guide Section 3: System Configuration
I458GB issue 6 Page 53
t
Select one of the available source streams.
Each source is listed by the device name, videoPort
name and suffixed by the connection type:
_rtp is an RTP Unicast connection,
_rtp(m) is an RTP Multicast connection,
_tcp is a TCP Unicast connection.
u
If the chosen source has an audio channel,
tick the audio enable box. Otherwise leave
this box unticked.
v
Click Update and Save.
The chosen source should now appear on the output display.
If not, please refer to ‘Display Checkup’ on page 57.