User Guide User guide
Table Of Contents
- What is VN-MATRIX?
- Functional Overview
- Example System Application
- Front Panel Features
- Rear Panel Features
- Accessories
- Choosing a Suitable Location
- Mains Power Connection (via PSU)
- Mains Power Cord (for PSU)
- Setup and Connection Procedure
- The VN-MATRIX Web Interface
- Configuring a VN-MATRIX as an Encoder (source)
- Configuring a VN-MATRIX as a Decoder (display)
- Troubleshooting
- Encoder Set Up
- Decoder Set Up
- System Set Up
- Overview
- Setting-up a Serial Data Stream
- Setting-up a Serial Passthrough Group
- Setting-up a Remote Control Group
- Serial / Telnet Commands
- Overview
- VN-MATRIX Hardware
- Serial Interface – Quick Reference
- Telnet Interface – Quick Reference
- Web Interface – Quick Reference
- Network Characteristics
VN-MATRIX User Guide Section 3: System Configuration
I458GB issue 6 Page 45
On-line Help
On-line help is available for each page in the Web Interface by simply clicking the tab.
Interface Timeout & Logging Out
If the web interface is left unattended or is not used for a period of 30 minutes it will automatically
logout. You can start using the interface again by re-entering your login details.
To logout of the Web Interface…
Click the tab on any page.
Update Button and Save Tab
Most pages in the web interface have an Update button and/or a Save tab:
Clicking the Update button implements the settings for the current page/device
but does not save them to the VN-MATRIX flash memory, i.e. if the unit is rebooted
the previous settings will be used.
Clicking the Save tab implements the settings for the current page/device
and does save them to the VN-MATRIX flash memory.
On the Device List page only there is a SaveAll tab:
Clicking the SaveAll tab will save all current settings (including those that have been
‘updated’) for all VN-MATRIX units.