User Guide User guide
Table Of Contents
- What is VN-MATRIX?
- Functional Overview
- Example System Application
- Front Panel Features
- Rear Panel Features
- Accessories
- Choosing a Suitable Location
- Mains Power Connection (via PSU)
- Mains Power Cord (for PSU)
- Setup and Connection Procedure
- The VN-MATRIX Web Interface
- Configuring a VN-MATRIX as an Encoder (source)
- Configuring a VN-MATRIX as a Decoder (display)
- Troubleshooting
- Encoder Set Up
- Decoder Set Up
- System Set Up
- Overview
- Setting-up a Serial Data Stream
- Setting-up a Serial Passthrough Group
- Setting-up a Remote Control Group
- Serial / Telnet Commands
- Overview
- VN-MATRIX Hardware
- Serial Interface – Quick Reference
- Telnet Interface – Quick Reference
- Web Interface – Quick Reference
- Network Characteristics
VN-MATRIX User Guide Section 3: System Configuration
I458GB issue 6 Page 43
Accessing the Web Interface
Use the address box of your chosen browser to enter the following URL:
http://xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP address of the VN-MATRIX controller.
The following page will appear in the browser:
Click the text as directed to reveal the login screen:
Enter the appropriate User name and Password.
VN-MATRIX has two user accounts:
admin – which allows full read/write access to all setup parameters,
public – which allows read only access to setup parameters.
Initially the password for both accounts is the same as the user name (i.e. the account name).
It is recommended that these are changed once commissioning is complete (see page 81).
Click the Login button.
If the login details are correct the Device List page will appear (see next page).