User Guide User guide
Table Of Contents
- What is VN-MATRIX?
- Functional Overview
- Example System Application
- Front Panel Features
- Rear Panel Features
- Accessories
- Choosing a Suitable Location
- Mains Power Connection (via PSU)
- Mains Power Cord (for PSU)
- Setup and Connection Procedure
- The VN-MATRIX Web Interface
- Configuring a VN-MATRIX as an Encoder (source)
- Configuring a VN-MATRIX as a Decoder (display)
- Troubleshooting
- Encoder Set Up
- Decoder Set Up
- System Set Up
- Overview
- Setting-up a Serial Data Stream
- Setting-up a Serial Passthrough Group
- Setting-up a Remote Control Group
- Serial / Telnet Commands
- Overview
- VN-MATRIX Hardware
- Serial Interface – Quick Reference
- Telnet Interface – Quick Reference
- Web Interface – Quick Reference
- Network Characteristics
VN-MATRIX User Guide Section 1: Introduction
I458GB issue 6 Page 13
Network Requirements
VN-MATRIX uses highly efficient compression algorithms to minimize the amount of data needed to
be transported across the network.
It is, however, crucial to the effective operation of VN-MATRIX that sufficient data throughput can be
achieved, especially where multiple sources are being encoded.
The efficiency of a network will be directly affected by the speed and configuration of each element
within its infrastructure, e.g. switchers and routers. VN-MATRIX will achieve optimum transmission
results over a dedicated 1Gbps network (Gigabit Ethernet).
For more general information on networks and network performance, please refer to Appendix B on
page 128.