User Guide User guide
Table Of Contents
- What is VN-MATRIX?
- Functional Overview
- Example System Application
- Front Panel Features
- Rear Panel Features
- Accessories
- Choosing a Suitable Location
- Mains Power Connection (via PSU)
- Mains Power Cord (for PSU)
- Setup and Connection Procedure
- The VN-MATRIX Web Interface
- Configuring a VN-MATRIX as an Encoder (source)
- Configuring a VN-MATRIX as a Decoder (display)
- Troubleshooting
- Encoder Set Up
- Decoder Set Up
- System Set Up
- Overview
- Setting-up a Serial Data Stream
- Setting-up a Serial Passthrough Group
- Setting-up a Remote Control Group
- Serial / Telnet Commands
- Overview
- VN-MATRIX Hardware
- Serial Interface – Quick Reference
- Telnet Interface – Quick Reference
- Web Interface – Quick Reference
- Network Characteristics
Section 7: Technical Data VN-MATRIX User Guide
Page 112 I458GB issue 6
Display/Decoder Device Type:
Use this page to:
Configure VN-MATRIX as an Encoder (see page 46)
Configure VN-MATRIX as a Decoder (see page 51)
Change the device type (click change device type button)
Change the device name (edit the Name field)
Change the device mode (edit the Mode field)
Switch to configuration pages (click on videoPort0, audioPort0 or display0 links)
Switch to Upgrade page (click the Upgrade tab)
Switch to Serial configuration page (click the Serial tab)
For further information:
Refer to the online help (click the Help tab)