Specifications

N E W P R O D U C T S
31
China
+86.21.3760.1568 / +4000.398766
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Middle East
+971.4.299.1800
+971.4.299.1880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
AUDIO PRODUCTS
SF 26X
Two-Way SoundField Open Back 8 Ohm Ceiling Speakers
The Extron SoundField
®
SF 26X is a two-way ceiling
speaker featuring an open back and coaxial dual driver
design for use in non-plenum airspace environments.
The driver complement includes a 6.5" (16.5cm)
woofer coupled to a 3/4" (1.9cm) ferrofluid-cooled
dome tweeter. The SF26Xprovides a frequencyrange
of 50Hz to 20kHz for accurate voice and detailed
music reproduction. This speaker offers a nominal
impedance of 8ohms, and is engineered with a wide,
uniform 110° conical coverage and uncoloredoff-axis
response. The SF26X features a thin-edged bezel for a
refined appearance on the ceiling, and a magnetically
attached grille.
FEATURES
•
Open back, infinite baffle design
• 8ohm nominal impedance
• 3/4" (1.9cm) ferrofluid-cooled dome tweeter
• 6.5" (16.5cm) polypropylene woofer
• Frequency range: 50Hz to 20kHz
• 25watts continuous pink noise, 50watts
continuous program
• 110° conical dispersion
• Internal driver overload protection
• Thin bezel and magnetically attached grille
• 5year parts and labor warranty
Model Version Description Part Number
SF 26X 8 ohm - Open Back, Pair ...................... 60-1312-03
AXP 50 C AT
Five Input Audio Expansion Processor with AEC and Dante
The Extron AXP50CAT is a five input audio expansion
processor with Extron ProDSP
™
for integrating remote
microphones and other sources onto a Dante
™
-enabled
Extron DMP128 audio system. A simple Ethernet link,
from an AXP50CAT in a remote location such as a
conference table, to a central equipment rack avoids
the effort and expense of pulling several audio cables.
The AXP50CAT provides 48volt phantom power
to its mic/line inputs. It is unique in that dedicated
signal processing is available for each input, including
gain, filtering, dynamics, and AEC - acoustic echo
cancellation. The intuitive DSPConfigurator
™
Software
makes it quick and easy to set up the AXP50CAT and
route its inputs to one or more DMP128AT units on the
Dante network.
FEATURES
•
Five mic/line level inputs with 48volt
phantom power
• Independent AEC- acoustic echo cancellation on
each channel
• Dante audio networking provides a wide range of
expansion capabilities
• Built-in four-port Gigabit switch
• One digital input and dual digital outputs at each
mic/line input
• Compact 1U, half rack width metal enclosure
• ProDSP
™
32/64-bit floating point signal processing
• Studio grade 24-bit/48kHz analog-to-digital
converters
• Low latency DSP processing
• DSP Configurator
™
Software
• Intuitive Graphical User Environment
• Building Blocks processor settings
Model Version Description Part Number
AXP 50 C AT Audio Expansion Processor w/ AEC & Dante ... 60-1325-01