User Guide Owner's manual
Configuring a VND 250
1. Ensure that an HDMI display device is connected to the decoder (see Video
Connections on page 20).
2. If required, ensure that the analog program audio output is connected (see Audio
Connections on page 21).
3. If required, ensure that the return audio input is connected.
4. Open the VNM 250 GUI (see page 33).
5. In the Device List (see page 35), click on the VND 250 you wish to configure. The
Device tab opens. More information can be found about the Device List tab (on
page35) and the Decoder Device tab (on page 57).
6. Ensure the Mode is set to enable in the Device Setup panel (see figure 56,
1
):
11
2
2
Figure 56. Device Setup Panel
7. Configure the on‑screen text overlay, as required (see figure 56,
2
and see Device
Setup on page 57).
8. Click the Save All tab.
VNM 250 • Configuration with the VNM 250 GUI 72