User Guide Owner's manual

Click on any of the text or icons for a specific device to open the Device tab for that device.
For information about the encoder device tab, see page 45. For information about the
decoder device tab, see page 57.
Accounts tab — controller configuration
From the Device List tab, click the Accounts tab:
Figure 21. Accounts Tab
The Accounts screen is used to change the passwords of the public and admin accounts,
to update the system clock time, and to enter controller license details.
Password Management
The admin account allows full access to the VNM 250 web GUI. The public account allows
read‑only access.
The admin and public user names cannot be modified.
By default the password for the admin account is admin. The password for the public
account is public.
The admin account password can only be modified when you are already logged in as
admin. If you are logged in as public, the admin password modification fields are disabled.
To change the password, enter the Current Password, the New Password, repeat the new
password in the Confirm box then press Update Passwords.
NOTES:
• The password should consist of letters, numbers and the underscore character.
Case is significant.
• Some changes must be implemented by pressing the update button. Where
changes are pending both the changed item and the update button will be shown
in yellow.
VNM 250 • VNM 250 GUI Overview 36