User Guide Owner's manual

VNM 250 GUI

Overview

VNM 250 GUI Login

The system can be conﬁgured and controlled using a graphical user interface (GUI), which is

served by the VNM 250 device that is acting as the system controller. To use this GUI, follow

these instructions:

1. Use one of the following web browsers with the version shown or later:

z Windows

Internet Explorer

version 8

z Mozilla

Firefox

version 20

z Google

Chrome

™

version 30

The PC must be on the same network as the VNM 250 controller.

2. Enter the controller IP address in the search bar. Press <Enter>.

3. The VN‑Matrix Controller login page opens:

Figure 19. VN-Matrix Controller Login Page

4. Enter the Username and Password. By default, these are both admin (all lower case).

5. Press Log In. The VNM 250 GUI opens at the Device List tab (see page 35).

VNM 250 • VNM 250 GUI Overview 3333