User Guide Owner's manual

Genlock Sub-menu

The Genlock sub‑menu allows you to enable or disable genlock and to determine whether

the display will be a master or slave.

Genlock

[Enable]

Select:

Enable

Disable

Disable Enable

Frame lock Ref

[None]

Select:

None

[list of available devices]

Figure 91. VND 250 Decoder Genlock Sub-menu

1. In the main Genlock screen, press Next to open the Genlock mode selection screen.

2. Use the left rotary encoder to toggle between Enable and Disable. Enable ties the

display to the Genlock signal. Disable displays the signal without tying it to the Genlock

signal.

3. Use the right rotary encoder to select a decoder to be the master frame lock device.

4. Press Next to return to the main Genlock screen.

5. Press Menu to open the Reset sub‑menu screen.

Reset Sub-menu

The Reset sub‑menu allows you to reset many parameters to the factory defaults. It also

allows you to run the Sanitize process.

Reset

Reset [Factory IP]

[Activate]

Are you sure?

[Yes]

System Reset

in progress

Figure 92. VND 250 Decoder Reset Sub-menu

1. In the main Reset screen, press Next to open the Reset Options screen.

VNM 250 • Front Panel Menu Conﬁguration 109