User Guide Owner's manual

Output Sub-menu
The Output sub‑menu allows you to:
z Enable or Disable decoding
z Set Power save to Active or Inactive
z Scale the output resolution
NEXT
Output
[Enable]
NEXT
NEXT
Power save
[Active]
Scale mode
[None]
Output
MENU
Select: Enable
Disable
Test
Select: Active
Disabled
Select: Unity
Display
User
Scale mode
[None]
Scale mode
[Display]
Scale mode
[User]
NEXTNEXT
NEXT
Scale None
[Output Resolution]
Aspect Ratio
[Fill/Follow]
Set output res
[List of modes] [Refr
esh]
NEXTNEXT
NEXT
Figure 88. VND 250 Decoder Output Sub-menu
1. In the main Output screen, press Next to open the Output submenu.
2. Use either rotary encoder to select Enable (normal operation), Disable (stream
decoding is suspended), or Test (stream decoding is suspended and replaced by a test
pattern).
NOTE: Changing the mode in this menu resets the Power save timeout.
3. Press Next to open the Power save screen.
4. Use either rotary encoder to toggle between power save Active or Disabled.
NOTE:
• When power save is Active, after 5 minutes with no active stream, the output
sync is dropped to allow a locally connected monitor to enter power save
mode.
• When power save is Disabled, sync is available at all times.
5. Press Next to open the Scale mode screen.
VNM 250 • Front Panel Menu Configuration 106