User`s manual

VersaTools
®
MTP 15HD RS Series • Installation
VersaTools
®
MTP 15HD RS Series, cont’d
This manual documents two families of Extron MTP
transmitters and receivers:
• MTP, compatible with Extron’s Enhanced Skew-Free
™
A/V
UTP cable and Category (CAT) 5, 5e, and 6 shielded twisted
pair (STP), unshielded twisted pair (UTP), or foil shielded
twisted pair (FTP) cable.
• MTP C7 [CAT 7, C7], compatible with CAT 7 cable only.
In this manual, any reference to these products refers to either
family, unless explicitly stated.
For clarity and where applicable, in this manual, the
CAT 5/5e/6 versions are referred to as non-C7 MTPs.
About this Manual
This manual details the installation and operation of the:
• MTP T 15HD RS twisted pair (TP) transmitter
• MTP RL 15HD RS receiver with loop-through
• MTP RL 15HD RS SEQ receiver with loop-through and
skew equalization
In this manual:
• The term “transmitter” refers specically to the
MTP T 15HD RS transmitter.
• The term “receiver” refers to either of the receiver models,
the MTP RL 15HD RS or MTP RL 15HD RS SEQ.
• The term “SEQ receiver” refers specically to the
MTP RL 15HD RS SEQ receiver with skew equalization
capabilities.
About the MTP Transmitters and Receivers
The Extron MTP T 15HD RS transmitter and MTP RL 15HD RS
and MTP RL 15HD RS SEQ receivers are a system for long-
distance distribution of VGA or other high resolution video and
RS-232 serial communications.
The non C7 MTPs transmit and receive over Extron’s Enhanced
Skew-Free A/V UTP cable or over CAT 5, 5e, or 6 shielded
twisted pair (STP), unshielded twisted pair (UTP), or foil
shielded twisted pair (FTP) cable.
The C7 MTPs transmit and receive over CAT 7 TP cable only.
The MTPs are a part of the Extron VersaTools
®
line of basic
distribution ampliers, switchers, transmitters, receivers, and
associated video accessories.
VersaTools
®
MTP 15HD RS Series
VersaTools
®
MTP 15HD RS Series • Introduction2