User`s manual
VersaTools
®
MTP 15HD RS Series • Installation
Video output — receivers
Number/signal type ..................... 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs,
component video, S-video, or composite
video
Connectors
.................................... 1 female RJ-45
1 female 15-pin HD
Nominal level
................................ 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
0.3 Vp-p for C of S-video
Minimum/maximum levels
........ 0.3 V to 1.45 V p-p
Impedance ..................................... 75 ohms
Return loss ..................................... <-30 dB @ 5 MHz
DC offset ......................................... <±20 mV with input at 0 offset
Maximum resolution .................... 2048 x 1080
Sync
Input type (transmitter) ............... RGBHV, RGBS, RGsB, RsGsBs
Output type (receivers) ................ RGBHV, RGBS, RGsB, RsGsBs
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level (transmitter) .............. 3.5 V to 5.5 Vp-p, unterminated
Output level (receivers) ................ 4.0 V to 5.0 Vp-p, unterminated
Input impedance .......................... 510 ohms
Output impedance ....................... 110 ohms
Max. input voltage ....................... 5.5 Vp-p
Polarity
Transmitter
......................... Positive or negative (follows input
polarity)
Receivers
............................. Positive or negative (switch selectable)
25VersaTools
®
MTP 15HD RS Series • Specications