User`s manual

VersaTools
®
MTP 15HD RS Series • Installation
VersaTools
®
MTP 15HD RS Series, cont’d
5. Reliable earthing (grounding) — Reliable earthing of
rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than
direct connections to the branch circuit (such as the use of
power strips).
Installation instructions
For optional rack mounting, mount the MTP on any of the
following rack shelves:
• RSF 123 VersaTools rack shelf kit (part #60-190-20)
(gure 2 on page 9)
• RSB 123 VersaTools basic 1U rack shelf (part #60-604-21)
• RSU 126 6" deep 1U rack shelf kit (part #60-190-10)
• RSB 126 6" deep basic 1U rack shelf (part #60-604-11)
• RSU 129 standard 9.5" universal 1U rack shelf kit
(part #60-190-01) (gure 3 on page 9)
• RSB 129 basic 9.5" universal 1U rack shelf (part #60-604-02)
On the standard rack shelf, the MTP mounts in one of four
locations to the rear of the rack or in one of four locations to the
front of the rack.
1
. Remove the feet from the bottom of the MTP, if they are
installed.
2
. Mount the MTP using two 4-40 x 3/16" screws in opposite
(diagonal) corners to secure the MTP to the shelf.
3
. Install false faceplate(s) or other unit(s) to the rack shelf.
4. Insert the shelf into the rack, aligning the holes in the shelf
with those of the rack.
5
. Secure the shelf to the rack using the supplied machine
screws (gure 3).
8