User`s guide

VersaTools

MTP 15HD A Series • InstallationVersaTools

MTP 15HD A Series • Installation

VersaTools

MTP 15HD A Series, cont’d

VersaTools

MTP 15HD A Series • Installation VersaTools

MTP 15HD A Series • Connections

MTP T VGA RS

Figure 3 — Mounting the MTP on a standard shelf

1. Remove the feet from the bottom of the MTP if they are

already installed.

2. Mount the MTP using two 4-40 x 3/16" screws in opposite

(diagonal) corners to secure the MTP to the shelf.

3. Install false faceplate(s) or other unit(s) to the rack shelf.

Back of the rack mounting instructions

The MTP can be mounted to the rear of a rack using the Extron

MBB 100 VersaTools back of the rack mounting kit

(part #70-367-01) (figure 4). The kit allows the product to be

vertically mounted to the front or rear rack supports and facing

either towards the front or the rear of the rack.

MTP SERIES

Figure 4 — Attaching the back of the rack kit

1. Remove the feet from the bottom of the MTP if they are

installed.

2. Remove the two screws from one side of the unit. Retain

the screws for possible later reassembly without the

bracket.

3. Attach one bracket to the side of the unit using the longer

screws included in the kit.

4. Repeat steps 2 and 3 on the other side of the unit.

5. Mount the unit to the rack using the two included rack

screws (figure 5). The MTP can be vertically mounted

facing in either direction.