User`s guide

VersaTools
®
MTP 15HD A Series • InstallationVersaTools
®
MTP 15HD A Series • Installation
VersaTools
®
MTP 15HD A Series, cont’d
VersaTools
®
MTP 15HD A Series • Controls and Indicators
TP cable termination
RJ-45 termination with CAT 5, CAT 5e, or CAT 6 cable
must comply with the TIA/EIA T 568A or TIA/EIA T 568B
wiring standards for all connections.
RJ-45 termination with Skew-Free A/V UTP cable must
comply with TIA/EIA T 568 A only.
Figure 12 details the recommended termination of TP cables
with RJ-45 connectors in accordance with the TIA/EIA T 568A
or TIA/EIA T 568B wiring standards. You can use either
standard with CAT 5 cable, but ensure that you use the same
standard on both ends of the cable.
5
Pin
1 Red+/V. sync+
2 Red–/V. sync–
3 Mono audio+
Green–
6 Mono audio–
7 Blue+/H. sync+
8 Blue–/H. sync–
4
Wire color
White-green
NOTE If you are using Enhanced Skew-Free
™
A/V cable, use the TIA/EIA T 568A
standard only.
Green
White-orange
White-blue
Orange
White-brown
Brown
Wire color
568 A 568 B
Signal
White-orange
Orange
White-green
White-blue
Green
White-brown
Brown
Clip DownSide
1
1&2
3&6 4&5
7&8
2345678
1Pins 2345678
RJ-45
Connector
Twisted
Pairs
Green+Blue Blue
Figure 12 — TP cable termination
The audio data that is carried on wire pair 3 and 6 is
incompatible with TPX 88A, which cannot switch the
audio, output it locally, or break it away.
Enhanced Skew-free A/V cable is not recommended for
Ethernet/LAN applications.
This cable is specially designed for compatibility with
Extron’s Twisted Pair products that are wired using the
TIA/EIA 568 A standard.
18
The green, brown, and blue wire pairs of this cable have
virtually identical lengths and should be used to
transmit the RGB signals.
The orange wire pair of this cable has a different length
and should not be used to transmit the RGB signals.
Front Panel Controls and Indicators
See figure 13 to identify the front panel features on the
transmitter and receiver.
MTP R 15HD A or MTP RL 15HD A receiver
MTP T 15HD A transmitter
RGB
PEAKING
LEVEL
MTP SERIES
MTP RL 15HD A SEQ receiver
MTP SERIES
RGB
DELAY
PEAKING
LEVEL
RED
GREEN
BLUE
SELECT
MTP SERIES
2 3
1
1
2654 3
1
Figure 13 — MTP front panels
1
Power LED — This LED indicates power is applied to the MTP.
2
Level control — The Level control alters the video output
voltage to affect the brightness of the displayed image. Adjust
the knob while viewing the displayed image to set the level/
boost that provides the best picture quality.
19VersaTools
®
MTP 15HD A Series • Controls and Indicators