User`s guide

VersaTools
®
MTP Series • Installation
VersaTools
®
MTP Series • Installation
Installation, cont’d
1
S-video connector (SV models) — Connect an S-video input to
this 4-pin mini DIN connector.
2
Composite video connector (CV and AV models) — Connect a
composite video input to this connector (female RCA on the
MTP T AV AAP and MTP T AV 45, female BNC on all other
models).
3
Audio input captive screw connector (MTP T SV A,
MTP T AV) — Connect a balanced or unbalanced audio input to
this 3.5 mm, 5-pole captive screw connector. Connectors are
included with each MTP, but you must supply the audio cable.
See figure 2-7 to wire a connector for the appropriate input type
and impedance level. High impedance is generally over
800 ohms.
Unbalanced Input
Tip
Sleeve
Tip
Sleeve
Balanced Input
Tip
Ring
Sleeve (s)
Tip
Ring
Tip
Ring
Sleeve (s)
Tip
Ring
Balanced Input
(high impedance)
(high impedance) (600 ohms)
600 ohms
600 ohms
INPUT
LR
INPUT
LR
INPUT
LR
Figure 2-7 — Captive screw input connector
wiring
When making connections for the MTP from existing
audio cables, see figure 2-8 to identify the tip, ring, and
sleeve wires in various connectors. A mono audio
connector consists of the tip and sleeve. A stereo audio
connector consists of the tip, ring and sleeve. The ring,
tip, and sleeve wires are also shown on the captive screw
audio connector diagrams, figure 2-7 and figure 2-16.
Tip (+)
Sleeve ( )
RCA Connector (Mono)
Sleeve ( )
Ring (R)
Tip (L)
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 2-8 — Typical audio connectors
4
Audio input RCA connectors (RCA, AAP, and 45 models) —
Connect an unbalanced stereo audio source to these L(eft) and
R(ight) RCA connectors (figure 2-9).
Panel Features and Connections
Transmitter input connections
Figure 2-6 shows all of the combinations of video and audio
input connectors that you may encounter with your MTP
transmitter.
Some transmitters do not have audio connections.
12V
0.5a
INPUT
MTP T AV RCA
OUTPUT
MAX
VIDEO
LR
INPUT
LR
12V
0.5a
MTP T AV
OUTPUT
MAX
VIDEO
12V
0.5a
INPUT
LR
MTP T SV A
OUTPUT
MAX
S-VIDEO
12V
0.5a
INPUT
MTP T SV A RCA
OUTPUT
MAX
S-VIDEO
LR
VIDEO
LR
AUDIO INPUT
S-VIDEO
AUDIO INPUT
LR
AUDIO
S-VIDEO
LR
MTP T SVA AAP
AUDIO
VIDEO
LR
MTP T AV AAP
MTP T SV A RCA,
Rear Panel
MTP T AV RCA,
Rear Panel
MTP T AV 45,
Front Panel
MTP T SVA 45,
Front Panel
MTP T AV AAP,
Front Panel
MTP T SVA AAP,
Front Panel
MTP T SV A,
Rear Panel
MTP T AV,
Rear Panel
21
2 4
1
21
4
4
4
3
3
Figure 2-6 — Video and audio input connections
2-92-8
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. [phone]
Fax [phone]
[e-mail]