USB HUB4 Series AAP and MAAP USB Hubs 68-1735-01 Rev.
Precautions Safety Instructions • English Warning This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. Power sources • This equipment should be operated only from the power source indicated on the product. This equipment is intended to be used with a main power system with a grounded (neutral) conductor. The third (grounding) pin is a safety feature, do not attempt to bypass or disable it.
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
USB HUB4 Series
Table of Contents Chapter One • Introduction . ..................................................................................................... 1-1 About this Manual ..................................................................................................................... 1-2 About the USB HUB4 ................................................................................................................. 1-2 Features ........................................................................
PRELIMINARY Table of Contents, cont’d ii USB HUB4 Series • Table of Contents
1 Chapter One Introduction About this Manual About the USB HUB4 Application Diagram PRELIMINARY USB HUB4 Series
Introduction About this Manual This manual contains information about the installation and operation of the Extron USB HUB4 AAP and the USB HUB4 MAAP. The terms “hub” and “HUB4” are used to refer to both models interchangeably when instructions apply to both. About the USB HUB4 The USB HUB4 AAP and USB HUB4 MAAP are compact, four-port USB hubs designed to mount within a double-sized Extron AAP or MAAP frame.
Application Diagram The following diagram shows an example of a USB HUB4 AAP mounted to an MLM wallplate and installed in a podium. DISPLAY ON OFF VOLUME AUTO IMAGE 1 MUTE 2 3 ACTIVITY CONFIG 4 USB HUB4 AAP MediaLink Extron MLM 104 LAAP with MLC 104 IP Plus One USB Cable from PC to USB HUB4 AAP Extron USB HUB4 AAP Four-Port USB 2.
PRELIMINARY Introduction, cont’d 1-4 USB HUB4 Series • Introduction
2 Chapter Two Installation Installation Overview Rear Panel Connections Front Panel Features Mounting the USB HUB4 PRELIMINARY USB HUB4 Series
Installation Installation Overview 1 If using an electrical box or a mounting bracket, install it in the wall or furniture. See “Wall or furniture mounting”, later in this chapter. 2 Mount the USB HUB4 into an appropriate sized AAP or MAAP mounting frame, rack space frame, or other Extron architectural product. See “Mounting the hub to a mounting frame”, later in this chapter, for the procedure.
The rear panels of the USB HUB4 AAP and MAAP models contain two types of USB In connectors, either of which can be used for the USB cable that connects your computer to the HUB4. a Power connector — If using an Extron external 12 VDC power supply to power the HUB4, connect it to the first two pins (labeled In) of this 4-pole, 3.5 mm direct insertion captive screw connector.
Installation, cont’d Red White Green Black Shield Type A connector PRELIMINARY USB Type A-to-B (or mini B) cable with the Type B connector removed 3. Twist the exposed shield strands together. 4. Strip 1/8 inch (4.5 mm) of the insulation from the end of each colored wire of the cable. 5. Connect the colored wires and the twisted shield to the HUB4 as described below.
USB HUB4 AAP Mounting Frame USB 1 USB Ports Type A USB Type Mini B USB Connector POWER 12V 500mA IN OUT USB IN WIRE COLOR R W G +V D- D+ B S USB Cable (6’) Rear Red / +V White / DGreen / D+ Black / Braided Shield / S Captive Screw USB Connector N: Do not splice or extend the USB cable connecting the host computer to the HUB4 beyond 15 feet (4.5 m). Extending it further than this can cause USB communication to fail.
Installation, cont’d To wire the Extron external power supply, 1. Connect the power supply to the In pins (first and second) of the Power direct insertion connector as illustrated below. A Power Supply Output Cord SECTION A–A POWER 12V 500mA IN OUT USB IN WIRE COLOR R W G +V D- D+ B S Wiring the power connector PRELIMINARY 2.
Front Panel Features 1 ACTIVITY 3 2 HUB4 USB AAP USB HUB4 AAP 1 USB HUB4 AAP front panel ACTIVITY 3 PRELIMINARY 1 2 ACTIVITY USB HUB4 MAAP HUB4 USB MAAP 1 USB HUB4 MAAP front panel a USB hub connectors — Connect up to four USB peripheral devices (for example, a keyboard, mouse, or Web cam) to these Type A female USB connectors. Each USB port provides 100 mA of power when the HUB4 is powered via the host computer; 500 mA when it is powered by an Extron PS 1210 C 12 VDC external power supply.
Installation, cont’d Mounting the USB HUB4 The USB HUB4 can be mounted to a wall, on a rack, in furniture, or in an Extron architectural product, such as a cable cubby or HSA. Wall or furniture mounting The HUB4 can be attached to a wall, podium, or other flat surface with either a stud-mounted wall box or with a wall mounting bracket (such as the Extron MR or MR D series). Both types of installations require a double-spaced AAP or MAAP mounting frame (such as the AAP 102 or the CPM101).
Insert the wall box or mounting bracket into the opening, and attach it to the wall, stud, or furniture, leaving the front edge flush with the outer wall or furniture surface. Wall Stud Installation Cable Wall Stud Installation Cable Cable Clamp Cable Clamp Screws or Nails Screws or Nails Attaching a wall box to a wall stud • To attach a wall box to wood, use four #8 or #10 screws or 10-penny nails. A minimum of 1/2 inch (1.3 cm) of screw threads must penetrate the wood.
Installation, cont’d AAP 102 Mounting Frame 02 P1 AA ITY TIV AC B4 USB HU P AA Extron USB HUB4 AAP Mounting a USB HUB4 AAP to a two-gang mounting frame PRELIMINARY USB HUB4 MAAP: 1. Place the HUB4 MAAP in the one-gang opening in the mounting frame. 2. Insert the included hex screws through the HUB4 front panel mounting holes and the holes in the MAAP mounting frame. 3. Attach the provided hex nuts to the screws on the back of the frame.
3. Attach the AAP or MAAP mounting frame with the attached HUB4 to the mounting bracket using the two included mounting screws.
Installation, cont’d Rack mounting procedure To mount the USB HUB4 directly to a rack or to a rack shelf, 1. Connect all cables to the rear panel of the HUB4. 2. Insert the HUB4 in one of the spaces in a rack space frame and attach it to the frame using the provided hex screws and nuts. 3. Attach any desired additional AAP or MAAP devices to the rack space frame. 4. Attach the rack space frame to the rack shelf, using the provided screws. 5.
A Appendix A Reference Material Specifications Part Numbers and Accessories PRELIMINARY USB HUB4 Series
Reference Material Specifications USB USB standards ������������������������������� USB 2.0, USB 1.1, USB 1.0 compatible USB data rates �������������������������������� Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps) USB host Number/signal type ��������������������� 1 USB Connectors ������������������������������������� 1 female USB mini B or 1 female 3.5 mm captive screw connector, 5 pole (Only one port is active at a time.
Part Numbers and Accessories Included parts Replacement part number Included part USB HUB4 MAAP (black, white, or RAL9010 white) USB HUB4 AAP (black or white) 60-1030-11, -21, -51 60-1031-12, -22 USB Type A to USB mini Type B cable 26-264-06 USB HUB4 Series Setup Guide Optional accessories The following items can be purchased from Extron for use with the USB HUB4.
PRELIMINARY Reference Material, cont’d A-4 USB HUB4 Series • Reference Material
Extron Warranty Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase.
Extron USA - West Headquarters +800.633.9876 Inside USA / Canada Only +1.714.491.1500 +1.714.491.1517 FAX Extron USA - East Extron Europe Extron Asia Extron Japan Extron China Extron Middle East +800.633.9876 +800.3987.6673 Inside Europe Only +800.7339.8766 Inside Asia Only +81.3.3511.7655 +81.3.3511.7656 FAX +400.883.1568 +971.4.2991800 +971.4.2991880 FAX +1.919.863.1794 +1.919.863.1797 FAX +31.33.453.4040 +31.33.453.4050 FAX +65.6383.4400 +65.6383.
