User’s Guide RGB 190F RGB 192 www.extron.com Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia Extron Electronics, Japan 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 Fax +65.6383.4664 Daisan DMJ Building 6F 3-9-1 Kudan Minami Chiyoda-ku, Tokyo 102-0074 Japan +81.3.3511.
Precautions Safety Instructions • English This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock. Caution Read Instructions • Read and understand all safety and operating instructions before using the equipment.
Table of Contents Chapter 1 • Introduction .......................................................... 1-1 About this Manual ................................................................ 1-2 About the RGB 190F and RGB 192 ................................. 1-2 Features ...................................................................................... 1-3 Chapter 2 • Installation and Operation ......................... 2-1 Installation Overview ..........................................................
Table of Contents, cont’d RGB 190F, RGB 192 1 Chapter One Introduction About this Manual About the RGB 190F and RGB 192 Features 68-647-01 Rev. B Printed in the USA 10 02 All trademarks mentioned in this manual are the properties of their respective owners.
Introduction, cont’d Introduction About this Manual This manual contains information about the Extron RGB 190F universal interface and the RGB 192 universal interface with audio, detailing how to operate and configure them. The two interfaces are functionally identical, with the exception of the RGB 192’s audio capabilities. Both interfaces are described in this manual; differences are noted where they exist.
Introduction, cont’d RGB 190F, RGB 192 Page intentionally left blank 2 Chapter Two Installation and Operation Installation Overview Mounting the Interfaces Connections and Switches Operation and Troubleshooting 1-4 RGB 190F, RGB 192 • Introduction
Installation and Operation, cont’d Installation and Operation Installation Overview This is an overview of the installation process. You will find detailed installation and operation instructions in this chapter. Install and set up the RGB 190F and RGB 192 interfaces following these basic steps: 1 Turn all of the equipment (computers, remote controls, interface, projector/monitor, local monitor, and speakers or other audio device) off. Disconnect the power cords from the power source.
Installation and Operation, cont’d 8 2* 1 3 9 6 A U D IO C O M P U TE R M AUDIO COMPUTER O N O G IT R H-SHIFT SERR SOG LEVEL B R DDSP NO MON. M . AU D I O 19 2 H ON -S H IF 1 T O N 3 4 5 S E L S RR E O V G E L 2 6 D N D M O SP . M A O U N D . IO 1 2 3 4 5 6 INPUT M O N I TO R RGB 192 POWER 12-15V 1A MAX. AUDIO L/MONO 4 7 Figure 2-2 — Through-desk mounting 4. Cut out the material from the installation area with a jigsaw.
Installation and Operation, cont’d For RGsB (sync on green, SOG), connect the cables to three BNCs. Also select the SOG option on the front panel DIP switch (see item 6 , Dip switches in this chapter. RGsB 5* Stereo audio output connector (RGB 192 only) — Connect an audio device, such as powered speakers, to this 3.5mm, 5-pole captive screw connector for balanced or unbalanced stereo or mono audio output.
Installation and Operation, cont’d 5 — No monitor (ID bit termination) — This switch controls the input assigned to the local monitor output and ID bit termination. On — ID bits 4 and 11 are tied to ground. Off — ID bits 4 and 11 are unterminated. 6 — Mono audio output (RGB 192 only, spare on RGB 190F) On — Monaural audio is output on the left channel only. When mono is selected, the right and left inputs are combined and placed on the left output connectors. Off — Normal stereo output.
Installation and Operation, cont’d 5. If the edges of the image seem to exceed their boundaries or if thin lines and sharp edges look thick and fuzzy, try changing the Level DIP switch (switch 1) to On (up). If the image is too bright, turn the Level switch to Off (down). 6. If the image still does not display correctly, call the Extron S3 Sales & Technical Support Hotline.
Reference Information, cont’d Reference Information Specifications Video Gain ............................................... Unity (0.7V), (0.80V) 15% with 3dB peaking Bandwidth .................................... 300 MHz (-3dB) Rise time ........................................ 1.5 ns Video input Number/signal type ................... Connectors .................................... Nominal level ............................... Minimum/maximum levels ...... Impedance ....................................
Reference Information, cont’d Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing Rack mount ................................... No, but furniture mountable with optional mounting brackets Enclosure type .............................. Metal Enclosure dimensions ................. 1.0" H x 5.7" W x 4.5" D 2.54 cm H x 14.48 cm W x 11.43 cm D (Depth excludes connectors.) Product weight .......
Reference Information, cont’d BNC cable (cont’d) A-6 Part number BNC-5 75’ HR 26-260-16 BNC-5 100’ HR 26-260-05 BNC-5 3’ HRP 26-378-01 BNC-5 6’ HRP 26-378-02 BNC-5 12’ HRP 26-378-03 BNC-5 25’ HRP 26-378-04 BNC-5 50’ HRP 26-378-05 BNC-5 75’ HRP 26-378-06 BNC-5 100’ HRP 26-378-07 RGB 190F, RGB 192 • Reference Information Page intentionally left blank RGB 190F, RGB 192 • Reference Information A-7
Reference Information, cont’d Page intentionally left blank A-8 RGB 190F, RGB 192 • Reference Information
