User guide

For mounting the VTT001 MAAP or VTR001 MAAP to a rack mount shelf, mount the

transmitter/receiver modules to the AV connector frame, then attach the frame to the

shelf, as shown below.

(4) #4 - 40

Screws

(4) #6 Screws

RSB 129 (60-190-01)

Rack Mount Shelf

VIDEO INPUT

VTT 001 CM

Twiste d Pai r Trans mitt er

POWER

CPM1

33 (60-584-15) or

Connector Frame

Figure 12. CPM133 AV Connector Frame Mounted to a Rack Shelf

For mounting the VTR001 AAP to a rack, mount the AAP modules to the Extron AAP

frame, then attach the frame to the rack, as shown below.

#4-40 Nut with

Captive Washer

AAP 301

VTR001 AAP

Twisted Pair Transmitter

AAP 301

Architectural Frame

#10-32 Screw/

Nylon Captive

Cap Washer

INPUT

VTT001 AAP

Figure 13. Extron AAP 301 Frame Mounted Directly to a Rack

2. Attach all power and video cables to the rear of the transmitter/receiver. Power on the

transmitter/receiver now if the external power supply cannot be accessed once the

transmitter/receiver is mounted.

3. Attach the video input and output devices to the front faceplates of the transmitter and

receiver, respectively. Power on all devices.

VTT001 and VTR001 User Guide • Installation 16